pn 16

A Dual Plate Check Valve" from Honeywell is a type of valve that allows fluid to flow in one direction only, preventing backflow, by utilizing two spring-loaded plates that quickly close against each other when pressure reverses, offering a reliable and efficient way to protect systems from potential damage caused by backflow; essentially, it's a "non-return valve" with a faster closing mechanism compared to a single plate design. Salient Features: Model Number: DPCV-IMP-PN16 Sizes Available : 50mm - 600mm Cast Iron / Ductile Iron Body with DI or SS Disc Wafer Type Design, to take lesser space than the conventional Check Valve. Less Wear and Tear of Seat Surfaces Being cylindrical body, stresses are uniformly distributed Much longer Seat life because of Ductile Iron / S.S. to Rubber Contact Water hammering effect is minimized in this design, since the closing of valve does not depend on any back pressure or flow End connections are designed to suit flanges drilled to ISO: 7005-2, IS 1538, ANSI B Class-125, Class-150, Table 'D' and Table 'E' Specifications: Sizes DN50 - DN600 Medium Type Water Medium Temprature -10°C ~ +110°C Max. Nominal Pressure PN16 Test Pressure (Hydrostatic) Shell Test 24 Bar Seat Test 17.6 Bar Suitable Insertion ISO: 7005-2, IS 1538, ANSI B Class-125 / ASME B Class- 150, Table ‘D’ and Table ‘E’

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Salient Features: Model Number: BFM-IMP-PN16 Sizes Available : 50mm - 600mm Design Standard IS 13095 / BS EN 593 (BS 5155) Wafer Type Electrical Acuator Operated ON/FF and Modulating type actuation control Cast Iron / Ductile Iron construction. Stainless Steel (SS304) Disc Compatible with B.M.S (Building Management System) IP 67 protection available for outdoor application Anti-condensation space heater available in the actuator Input Voltage – 230+/-10% VAC 50/60 Hz power supply Till size 200mm Liner will be renewable & above 200mm Body molded rubber (EPDM) Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113) /IS 1538 (B16.5#150)1092-2 Specifications: VALVE Size Range DN50 - DN600 Suitable for Water Medium Temp -10°C to 110°C Nominal Pressure PN16 ACTUATOR Power Supply 220Vac, 50/60 Hz Travel Angle 90º ± 5º Feedback 2 Aux Switches Enclosure IP67 Waterproof Ambient Temperature -10°C to +65°C Indicator Continuous Position Indicator with manual override Worm Gear Permanently lubricated and self-locking Material Aluminum Alloy External Coating Dry Powder Coating Test Pressure (Hydrostatic) Shell Test 24 Bar Seat Test 17.6 Bar

A Dual Plate Check Valve" from Honeywell is a type of valve that allows fluid to flow in one direction only, preventing backflow, by utilizing two spring-loaded plates that quickly close against each other when pressure reverses, offering a reliable and efficient way to protect systems from potential damage caused by backflow; essentially, it's a "non-return valve" with a faster closing mechanism compared to a single plate design. Salient Features: Model Number: DPCV-IMP-PN16 Sizes Available : 50mm - 600mm Cast Iron / Ductile Iron Body with DI or SS Disc Wafer Type Design, to take lesser space than the conventional Check Valve. Less Wear and Tear of Seat Surfaces Being cylindrical body, stresses are uniformly distributed Much longer Seat life because of Ductile Iron / S.S. to Rubber Contact Water hammering effect is minimized in this design, since the closing of valve does not depend on any back pressure or flow End connections are designed to suit flanges drilled to ISO: 7005-2, IS 1538, ANSI B Class-125, Class-150, Table 'D' and Table 'E' Specifications: Sizes DN50 - DN600 Medium Type Water Medium Temprature -10°C ~ +110°C Max. Nominal Pressure PN16 Test Pressure (Hydrostatic) Shell Test 24 Bar Seat Test 17.6 Bar Suitable Insertion ISO: 7005-2, IS 1538, ANSI B Class-125 / ASME B Class- 150, Table ‘D’ and Table ‘E’

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Salient Features: Model Number: BFM-IMP-PN16 Sizes Available : 50mm - 600mm Design Standard IS 13095 / BS EN 593 (BS 5155) Wafer Type Electrical Acuator Operated ON/FF and Modulating type actuation control Cast Iron / Ductile Iron construction. Ductile Iron Disc Compatible with B.M.S (Building Management System) IP 67 protection available for outdoor application Anti-condensation space heater available in the actuator Input Voltage – 230+/-10% VAC 50/60 Hz power supply Till size 200mm Liner will be renewable & above 200mm Body molded rubber (EPDM) Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113) /IS 1538 (B16.5#150)1092-2 Specifications: VALVE Size Range DN50 - DN600 Suitable for Water Medium Temp -10°C to 110°C Nominal Pressure PN16 ACTUATOR Power Supply 220Vac, 50/60 Hz Travel Angle 90º ± 5º Feedback 2 Aux Switches Enclosure IP67 Waterproof Ambient Temperature -10°C to +65°C Indicator Continuous Position Indicator with manual override Worm Gear Permanently lubricated and self-locking Material Aluminum Alloy External Coating Dry Powder Coating Test Pressure (Hydrostatic) Shell Test 24 Bar Seat Test 17.6 Bar

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Product Salient Features: Model Number - BFG-IMP-PN16 Sizes Available from 50mm - 600mm It's Operated by Quarter Turn Gear It's Stainless Steel Disc It has No Visible Leakage. Body liner (EPDM) will be renewable type for size upto DN150 and body molded type for size DN200 and above Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113)/IS 1538 (B16.5#150)1092-2 Product Specifications: Size Range DN50-DN600 Nominal Pressure PN16 Medium Temperature -10°C ~ +110°C Maximum Body Material Upto DN250 - Cast Iron DN300-DN750 – Ductile Iron Stem Material ASTM A276, GR SS 410 Leakage Rate No visible leakage Maximum Working Pressure 16 Bar(PN16) Medium Type Water Test Pressure (Hydrostatic) Shell Test pressure 24 Bar Seal Test pressure 17.6 Bar

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Product Salient Features: Model Number - BFH-IMP-PN16 Sizes Available from 40mm - 300mm It's Operated by Hand Lever / Quarter Turn Lever It's Stainless Steel Disc It has No Visible Leakage. Body liner (EPDM) will be renewable type for size upto DN150 and body molded type for size DN200 and above Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113)/IS 1538 (B16.5#150)1092-2 Product Specifications: Size Range DN40 - DN300 Body Material Upto DN250-Cast Iron, DN300-Ductile Iron Pressure Rating PN16 Test Pressure (Hydrostatic) Shell 24 Bar Seat 17.6Bar Maximum Working Temperature -10°C to 110°C Maximum Working Pressure 16 Bar Suitable for Water

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Product Salient Features:  Model Number - BFG-IMP-PN16 Sizes Available from 50mm - 600mm It's Operated by Quarter Turn Gear It's Ductile Iron Disc It has No Visible Leakage. Body liner (EPDM) will be renewable type for size upto DN150 and body molded type for size DN200 and above Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113)/IS 1538 (B16.5#150)1092-2 Product Specifications:  Size Range - DN50-DN750 Nominal Pressure - PN16 Medium Temperature - (-10°C ~ +110°C Maximum) Body Material - Upto DN250 - Cast Iron/DN300-DN750 – Ductile Iron  Stem Material - ASTM A276, GR SS 410 Leakage Rate - No visible leakage Maximum Working Pressure - 16 Bar(PN16) Medium Type - Water Test Pressure (Hydrostatic) Shell Test pressure - 24 Bar  Seal Test pressure - 17.6 Bar

A Honeywell Impact butterfly valve PN 16 is typically used for regulating the flow of water in heating and cooling systems, particularly in HVAC applications, due to its design for handling both hot and chilled water, with the "PN 16" indicating its pressure rating suitable for moderate pressure applications; it can be used in potable water systems as well. Product Salient Features:  Model Number - BFH-IMP-PN16 Sizes Available from 40mm - 300mm It's Operated by Hand Lever/Quarter Turn Lever It's Ductile Iron Disc It has No Visible Leakage. Body liner will be renewable type for size upto DN150 and molded rubber EPDM type for size DN200 and above Compatible to sandwich between flanges as per ISO7005-1 Product Specifications:  Size Range - DN40 - DN300 Body Material - Upto DN250-Cast Iron/DN300-Ductile Iron  Test Pressure (Hydrostatic) Shell - 24 Bar Seat - 17.6Bar Maximum Working Temperature - (-10°C to 110°C) Maximum Working Pressure - 16 Bar Suitable for - Water Pressure Rating - PN16